AUSTRALIA NEW ZEALAND
Phone: 1300 8877 35 Phone: 0800 50 55 66
Phone: +61 3 9545 6229 Phone: +64 9 579 0141
Home
Products
       Controllers
       Data Loggers
       Displays
       Flow Meters
       Flow Switches
       Gas Detectors
       Ground Penetrating Radar
       Homeland Security - Water Reticulation
       Laboratory Instruments
       Leak Detection
       Level
       Online Process Instruments
       Pipe & Cable Locators
       Portable Instruments
       Pressure
       Reagents
       Samplers
Company
       About Us
       News
       FAQ
Services
       The Source Loyalty Program
Contact Us
 
 
Product Search
Keywords:
Product Category:
for more hach products

 go to www.hach.com
Request your Catalogue

 
Upcoming Events

 

 

Australia 

 2012 WIOA VIC

75th Annual Victorian Water Industry Engineers and Operators Conference
5 & 6 September 2012
Bendigo, Victoria
 

 

New Zealand
 
2012 Water New Zealand Conference and Expo
26 - 28 September 2012
Rotorua Energy Events Centre

2012 Food Tech Pack Tech Conference
25 - 27 September 2012
ASB Show Grounds, Greenlane, Auckland

 
 
40J-F1 Safe Area C447
Description

Ingress Protection: IP65
Material: Steel 0.8mm thick Polyurethane seal Lid fastening four M ...see more
Specification

 Weight: 0.3Kg
Dimensions: 142mm x 142mm x 63mm
Mounting: 2 - External lugs – 6mm holes
Diagonal fixing centres: 175mm
Advanced HACH LDO® Process Dissolved Oxygen Probe
Description

Hach’s next generation LDO® (Luminescent Dissolved Oxygen) Probe r ...see more
Specification
  • No Calibration Required
  • No Membranes to Replace
  • No Missed Cleaning Cycles
  • No Drift
  • No Complications
pH/ORP Differential Sensor
Description

PEEK, Convertible Body Style, 10m Cable, General Purpose Glass pH Electrode, Integrated Digital E ...see more
Specification
  • Exceptional Performance with the Differential Electrode Measurement Technique
  • Lower Maintenance Needs with the Double Junction Salt Bridge
  • Extended Working Life with the Replaceable Salt Bridge/Protector
  • Reliability with Built-in Encapsulated Preamp
  • Patented Technology
3000-F6 Explosion Proof-Hazardous Area C960
Description

Certification: EExd II T6 II2GD Certificate Sira 03ATEX1168X
Ingress Protection: IP66
 ...see more
Specification

 Mounting Detail: One entry box – two M5 (138mm CRS) 35°from vertical Two entry box – two M5 (150mm CRS) 60° from vertical
Weight: 4Kg
Approx. Dimensions: 83mm x 126mm
410 ORBISPHERE controller with K1100 Luminescent Oxygen Sensor (Kit) - Panel
Description

The Orbispher ...see more
Specification

 

One calibration per year

One zero point calibration per year is all that is needed with the K1100 sensor, unlike traditional electrochemical (EC) sensors, which display significant drift after only a few months and demand regular re-calibration and substantial operator time.

No Membranes = 5 Minutes of Maintenance

Low Cost Retrofit for existing Orbisphere EC sensor

The complete system consists of a 410 Controller, a flow chamber and the K1100 Luminescent Dissolved Oxygen Sensor. The sensor is compatible with Hach Orbisphere 28 mm flow chambers previously used with EC sensors.

The K1100 optical sensor is the first to use luminescent measurement technology to measure low level oxygen in power plants. Since 1978, when the first patent on EC sensors was granted, Hach Orbisphere sensors have set the industry standard for oxygen measurement at ppb level.
FP360sc Oil-in-Water Sensor
Description

Even the smal ...see more
Specification

 

Ambient Temperature:-5 to 45 °C (23 to 113 °F)

Cable Length:40 m (130 ft)

Detector:UV photodiode with interference filter; Compensation of daylight and flashlamp intensity fluctuations

Light Source:Miniature xenon flashlamp with interference filter

Measurement Method:UV fluorescence method for polycyclic aromatic hydrocarbons (PAH)

Reproducibility:2.5 % of measured value at constant temperature
(PAH)

Resolution:0.1 ppb (µg/L) (PAH) in the lowest measuring range

Response time T90:10 s

Sample Temperature:1 or 40 °C (33.8 to 104 °F)

Weight:Stainless Steel: 6.2 lbs or 2.8 kg

Hach Orbisphere 6110 Total Package Analyzer
Description

Easily and automatically provides oxygen and carbon dioxide concentrations for both the headspace ...see more
Specification

Analysis Time: Approximately 4 minutes

Interface: digital connections:1 x USB client, 1 x USB host, 1 x Ethernet

Interface: digital display:TFT VGA (640 x 480) color touch screen

Interface: operating system:Windows® CE 4.2

Operating range: Package Temperature: -2 to 30°C (28 to 86°F) Package Pressure: 1.4 to 6.8 bar (20 to 73 psia) Ambient Temperature: 0 to 40°C (32 to 104°F)

Power Requirements:100/240 Vac ±10 %, 50/60 Hz

Range: O2: 7 ppb to 12 ppm CO2:0.75 to 5 v/v or 1.5 to 10 g/kg

Repeatability: TPOϯ: ±5 µg/L ±10 % whichever the greater CO2: ±0.05 v/v or 0.10 g/kg ±2 %, whichever is greater, measured on equilibrated packages at 10 to 25 °C

Weight: 55 kg (121 lb.)
20J-F1 Safe Area C357
Description

Ingress Protection: IP65
Material: Polycarbonate
Finish: Light Grey RAL 7035
En ...see more
Specification

 Weight: 265gms
Dimensions: 122mm x 120mm x 56mm
Termination: 3 wire terminal or flammable CV transmitter (C323)
XDI-F1win Hazardous Area Gas Detector C744
Description

The XDI Gas Sensor is capable of utilising a wide range of sensor cell types offering an unmatche ...see more
Specification

Weight: 1.2Kg
Approx. Dimensions: 115mm W x 108mm H
Mounting Thread: 20mm 1.5mm Pitch – options 25mm, 3/4 NPT
Ingress Protection: IP63 + water shield IP65
XDI-F1win Hazardous Area Gas Detector C759
Description

The XDI Gas Sensor is capable of utilising a wide range of sensor cell types offering an unmatche ...see more
Specification

Outputs: 3 wire (4~20mA) 4 wire (Addressable)
Power Supply: 15 to 30vDC
Cable Entry: 2 x M20 - 1.5 pitch - alternatives 25mm - 3/4 NPT
Weight: 1.6kg
 

 
Login  | Site by Webpartners