Measurement Range: 0 to 20 ppm (mg/L)
Power Consumption: 12 V, 1.5 watts (provided by controller)
Dimensions: 270 x 250 mm (10.63 x 9.84 in.)
Shipping Weight: 6.5 kg (14.3 lbs.)

• Integrated pH and temperature monitoring gives greater accuracy for amperometric technology.
  

• Minimal calibration required with long term reliability.
  

• Easy to use graphic calibration interface via PC.

• Low power consumption electronics optimizing battery life.

• GSM/SMS communication.

• Transmits and generates data and alarms.

• Open protocol that can be integrated into any Scada system.

• IP68 rating.

 Dimensions (H x W X D): 15 in x 9.1 in x 17.7 in (380 mm x 230 mm x 450 mm)Display Real-time graphics, menu driven, LCD
Electrode: Dual platinum
Languages: English, French, and Spanish
Output: RS-232 Serial output to printer/PC
Power Requirements: /264 Vac, 47/63 Hz, 115 VA
Width US: N/A

Accuracy: ± 5 % or ±0.03 mg/L (ppm) as CL2, whichever is greater
Air Purge: N/A 0.1 cfm 20 psig instrument quality air at: maximum
Alarm: Relay Outputs
Certification: approved
Certifications 2: certified to CSA 22.2 No. 142
Cycle Time: 2.5 minutes
Depth: (13.5 x 16.5 x 7.5 in.)
Dimensions Metric (H x W X D): 16.5 in x 12.5 in x 6.7 in (419 mm x 318 mm x 171 mm)
Display: LCD, 3 digit measurement readout and six-character alphanumeric scrolling text line
Enclosure Rating: ABS plastic, two clear polycarbonate windows, IP 62 rated with the gasketed door latched
Inlet: polyethylene tube, quick-disconnect fitting
Interferences: Other oxidizing agents such as bromide, chlorine dioxide, permanganate and ozone will cause a positive interference. Hexavalent chromium will cause a positive interference:
1 mg/L Cr6+ = approximately 0.02 mg/L as Cl2.
Hardness must not exceed 1,000 mg/L as CaCO3. Light Source: Class 1 LED (light emitting diode) with a peak wavelength of 520 nm; 50,000 hours estimated minimum life
Lower Limit of Detection (LOD): 0.03 mg/L (ppm)
Mounting: Wall mount Operating Conditions (Temperature): 5 to 40 °C (41 to 104°F)
Operating Humidity: 90% at (90% at 104°F) maximum 40 °C
Power Requirements: 100-115 / 230 V AC, 50/60 Hz (switch selectable), 95 VA maximum, 2.5 Amp fuse
Precision: 3% or 0.01 mg/L (ppm) as CL2, whichever is greater
Pressure Limit: Inlet Pressure to Sample Conditioning 1.5 bar
Range: 0 - 5 mg/L free or total residual chlorine
Ranges: 0 - 5 mg/L free or total residual chlorine
Sample Flow Rate: 200 - 500 mL per minute minimum required
Sample Temperature: 5 to 40 °C (41 to 104°F)
Weight: 24.91 lbs. (11.3 kg)