Measuring ranges : 0,04 bar to 0-4 bar
Power supply : 12 - 40 Vdc
External load : 600 Ohm/24V to 1400 Ohm/40Vdc

Accuracy : 0,1% of adjusted span
Measuring ranges : 0,04 bar to 0-4 bar
Power supply : 12 - 40 Vdc

Power:
Input: 24 VDC, 110 VAC or 220 VAC
Consumption: @ 24 VDC 10 W (without heater) 101 W (with heater)
Size: 127 mm W x 305 mm L
Weight: 6.2 kg (13.5 lbs.)
Standard mounting Articulated bracket
Outputs:
Analog3: 4-20 mA; max. load 1,200 ohms; 1,500
VDC isolation:
Serial RS-232C bi-directional;
for test and setup only;
not isolated
Relays Programmable for range
(set/reset) or alarms

AC/DC Power Supply
Input voltage: 120 VAC, 20 VA; 50-60 Hz
Operating temperature: -10° C to +50° C
Range:
Minimum range 0.2 m
Maximum range1 150 m
AC Heater7:
Input voltage: 120 VAC, 100 W
Operating temperature: -40° C to +50° C
 

35m measuring range
24 VDC 2 wire loop powered
4/20mA output
pressure up to 40 bar
Flange temp up to 200*c

Supply Voltage: 24 VDC (loop)
Cable Length: 48” (1.2 m)
Process Temp:
F: -20° to 140°
C: -7° to 60°
Signal Output:
4-20 mA , two-wire reversible mA

Range: 1.25m

Accuracy: 3mm

Resolution: 0.5mm

Dead band: 5cm

Beam width: 5cm

Configuration: WebCal® PC Windows® USB 2.0 USB 2.0

Range: LU27: 4" to 8.2' (10 cm to 2.5 m)
LU28: 8" to 24.6' (20 cm to 7.5 m)
LU29: 8" to 32.8' (20 cm to 10 m)
Supply voltage:24 VDC
Consumption: 0.5W
Signal output: 4-20 mA, two-wire
Signal invert: 4-20 mA or 20-4 mA
 

Supply Voltage: 12-28 VDC
Signal Output: 4-20 mA, two-wire
Process Temp:
F: -7° to 140°
C: -20° to 60°
Loop Resistance: 500 Ohms @ 24 VDC

Power Supply: 12 - 30 VDC loop powered
Analogue output: 4-20mA
Accuracy:
<1.0m +/- 5mm
> 1.0m +/- 0.5%
Weight: 850g / 2 lbs

Power supply: 95/110/230 VAC +-10%. 50/60 Hz, 12VA, 24VDC + 25%, -10%, 9W
Analogue output: 4-20mA into 750 Ohms. 16 bit
Relay Outputs: 3 multi-function SPDT relays rated 8A/250VAC/30VDC resistive