9890 RFXT Triple Frequency Line and Fault Locator combines the features of the triple frequency pipe and cable locator with a fault locator. The pipe and cable locating facility is exactly the same as the 9890 RLXT, however the transmitter supplied is also capable of transmitting the signal (4.8Hz) for the fault loator. A separate receiver called te SFL - 2 is supplied. This receiver looks like an "A" Frame, has automatic gain and a visual display indicating the direction of the sheaf fault.

Features

• Automatically determines best locating frequency for your line.
• The ability to simultaneously transmit in all three active frequencies.
• Two Active Frequencies 982Hz,9.8KHz and 82KHz.
• Low, Medium and High Power Output options allow you to control the power.
• Distance sensitive left/right visual and Audio Guidance, it is possible to locate with your eyes closed.
• Automatic Gain Adjustment, you don’t have to waste time tuning the sensitivity.
• Manual Gain over ride feature is used to identify ghost signals.
• Current Measurement, indicating when you stray to another pipe or the pipe has forked.
• Single Button Push for Depth measurement to center of pipe in cm down to 600cm.
• Weather-resistant, tough and lightweight – 2.35KG.
• Loop Resistance Reading – Confirms you are transmitting a traceable signal.
• Visual and Audible Distance Sensitive Left/Right Guidance™.
• Easy-to-read display with a back light function for locating in poorly lit areas.
• Ability to trace Sondes.
• Rechargeable Transmitter Batteries.
• SFL – 2 Receiver has a visual display indicating the direction of the fault.
  

Applications

• Locating Metallic water and gas pipelines
• Locating Electric cables, cables and tracer wires
• Locating Sondes
• Pinpointing Sheaf Faults

Frequencies

• 3 Active Frequencies for Direct Connect and Inductive Locating:
  1. 82KHz (High) for locating street light cables and metallic pipelines with insulated joints or non-conductive fittings.
  2. 9.8KHz (Medium) for locating pipelines with cathodic protection, coated pipes, uncoated pipes (depending on condition), power and telephone cables.
  3. 982Hz (Low) for locating long pipelines with good coatings, trunk cables and accurate pipe and cable location in areas congested with multiple services.
• 2 Passive Frequencies:
1. 50Hz for Locating Buried Electric cables that are drawing current.
2. 14 – 22KHz – for blind Searches

Standard Equipment

• Transmitter
• Receiver
• Hard carrying case
• Conductive attachment
• Earth Spike and plate
• Rechargeable transmitter batteries and Charger.
• Operating manual
• SFL-2 receiver

For further information on this item, please download the product brochure
9890 Triple Fault Locator Datasheet